How to Replace the Kickstand on Your ZOUPW 450W Solar Panel | Easy Step-by-Step Guide

Here you can find Solar Panels and technological accessories related to Solar Energy: Click Here If you want to learn about Solar...

Here you can find Solar Panels and technological accessories related to Solar Energy: Click Here

If you want to learn about Solar Panels, to advise you before buying or to build your own Solar Panel: Click Here

[Music] Two people open the packaging. Remove the foam padding. Tilt it at a slight angle. Place the bag on a clean and flat workbench. Position the side with the stitched logo facing upward. Remove the foam pads from the four corners and unzip the bag. Take out the panel. Be careful not to scratch the surface. Place the panel face down on the workbench with the bracket side facing upward. Lay it flat on the workbench. The bracket that needs to be replaced is located here. Remove the old bracket and replace it with a new one. The new bracket has a wider connector interface compared to the old one. Use a drill with a 4 mm hex bit to remove the rivets. Control the drilling depth to within 10 millimeters to avoid piercing through the product. The rivets are singleuse and cannot be reused once removed. Repeat the same process on the other side. Then pull out the bracket. For the removed bracket, use the drill with a handle to extract the screws. These screws are reusable. Repeat the same process on the other side. Then remove and replace it with the new bracket interface. Snap the bracket into the interface. Insert the screws from the accessory kit on the left side. Place the washers and nuts on the right side. Use the drill with a handle to tighten the screws into place. Do not overtighten as this may affect the flexibility of the bracket adjustment. Secure the screws on the other side as well. Done. It's ready. Then we reattach it. Align it with the mounting holes. Place the matching rivets in their designated positions. Secure the rivets using a rivet gun. The bracket replacement is now complete. Proceed to replace the remaining three brackets in the same manner. [Music] ...